Comments
-
Stephan, it appears that this was wired in the "A"
-
UPDATE: just to provide an update here - it would seem that there is a BUG in one or the other of the products in play here. but with the aid of SonicWall engineering we were able to find a configuration that worked. But not an explanation of why the other methods did not. on the SonicWall side of the equation they have a…
-
UPDATE: So the customer wanted to get the network up and running now - so we decided to get creative with the wiring and I had them re-terminate the lines on both ends again but using brown/white brown as the wires for pins one and two since there is no POE in play on this run to the ONT. And with that the open on pin one…
-
Well the customer has tested and it shows pin one open. they have re-terminated both ends and it still tests with pin one open. so it must be in the cable run. they are running a new cable, but not until a week from this Monday. My Question ( and the customer's) is how is it working with the TZ300 if the cable is bad? So…
-
Arkwright, understood and I have asked the customer to test the line. but it makes no sense since the TZ300 works just fine with the current cabling, are there differences between the TZ300 and the TZ370 Wan ports that could explain why the 300 is working and the 370 will not? I expect that we may find an issue with the…
-
TKWiTS, Thank you here is an image of the Grandstream Phase one and Phase two settings:
-
Cyber M; I have read through your post and the comments a few times and I am still wondering how you have the SMTP Service setup on the firewall and has it been tested? I have just setup a user with OTP via Email and the email gets sent out - no problem. I believe the confusion here is the setup of the SMTP Service is…
-
This raises two questions for me... where would the frame size for UDP Traffic be defined? I would expect it be defined by the VoIP hardware but I am not sure. and the second question is: Under What situation/configuration does this happen? I have dozens of SonicWalls deployed running 7.0.x with VoIP being used. Is this…
-
I will add that more recently I have also been seeing the pages displayed as mostly text and not linkable - I have to refresh the page several times before it displays correctly. that is if it does not revert back to a log in prompt which it does sometimes. I only have TZ devices deployed with V7 all of my NSA devices are…
-
I have had this issue with Chrome since I deployed my first V7 Firewall. It happens consistently on all versions. I have been hoping that the issue would be addressed by FW update but so far it has not. The resulting URL after logging in is https://<IP-Address>/sonicui/7/ I have been working around this by just appending…
-
BWC - I was not seeing any traffic being dropped - and honestly it baffled me. the TZ670 config was a converted NSA2650 config. so I decided to blow away the Virtual Interfaces and recreate them - and the DHCP Server is now responding. I can not explain why this happened as the scope was in place and active - just not…